Version 6.4.3.26 Released 11/16/17

  • [h=3]Features:[/h]

    • Release Highlights

      • New provider profile: "Deutsche Telekom DeutschlandLAN SIP-Trunk Pooling". We recommend using a LANCOM router.
        Developer Comment: STARFACE now natively supports Deutsche Telekom's DeutschlandLAN SIP-Trunk. However, we continue to recommend using a LANCOM router from Deutsche Telekom when using this SIP Trunk. Alterations to the SIP parameters of Deutsche Telekom's service will be published immediately or at the next opportunity to Deutsche Telekom's LANCOM routers, should these be necessary. This means that you will always be up to date with the latest sip profile for your DeutschlandLAN SIP-Trunk connection. As we are not proactively informed of changes to the platform, any changes on our end can only be done after the fact, which would mean a certain amount of downtime for the customer.
      • System status: New tab "Diagnosis" with the option to create and download TCP-Dumps from the Administration Interface
      • Calls to iOS UCC Mobile Clients now send push notifications
      • The communication between the STARFACE and Snom Telephones is now encrypted
      • UCC Client for Windows: Instant messages can now be sent to offline users
      • A new "expert configuration mode" has been added, which contains seldom used settings
        Developer Comment: We have noticed that some settings are used rarely. These settings overloaded the Settings menu, which made building an intuitive configuration panel difficult. We therefore moved rare used and complex settings and to a separate "Expert Mode", to make the more commonly configured settings easier and simpler to find and set
      • UCC Client for Windows: iFMC can now be configured in the UCC Client



    • New Features

      • Added a new neutral phone number prefix, to avoid manipulation of the signaled number when using CLIP NoScreening and SIP lines.
      • The STARFACE can now resolve SRV DNS Records for SIP Provider Profiles
      • System status: New tab "Diagnosis" with the option to create and download TCP-Dumps from the Administration Interface
      • Instant Messaging: Messages to offline users are now delivered when they next log in (Offline Messaging)
      • Email Templates are now updated centrally by STARFACE.
      • The encryption of traffic between the STARFACE server and its telephones can be toggled
      • The first three administrator accounts can log in after importing a backup with more than three users on a newly installed STARFACE
      • New SIP Provider: Ecotel has been integrated
      • New Provider profile for LANCOM Routers, which can be used to connect to the Deutsche Telekom DeutschlandLAN SIP-Trunk
      • New Integration: Snom D710
      • New Integration: Snom D712
      • New Integration: Grandstream HT 814



    • Improvements

      • The user import template now contains an demo entry
      • Onboarding emails are now sent to administrators of newly installed systems
      • Telephone Conference participants now hear the same announcements regardless of how they logged in
      • The system performance when a large number of UCC Clients are logged in has been improved
      • Performance: Various improvements for WebUI navigation
      • Usability: It is no longer possible to add more LDAP directories if all of the directories on the LDAP are in use
      • LDAP: Added two search methods "precise" and "fast", to allow address book resolution from large databases in an acceptable timeframe
      • Provider profiles which were downloaded from SIPTRUNK.DE without being tested by the platform are no longer marked as "Verified"
      • Provider profiles downloaded from SIPTRUNK.DE are now used immediately
      • Provider profiles previously downloaded from SIPTRUNK.DE which are still available on the service are marked as "verified" in the profile selection dropdown
      • A system notification is now sent if the SIPTRUNK.DE provider profile download should fail
      • SIPTRUNK.DE: The data transfer is now encrypted via HTTPS
      • Modules can once again be run with root-level permissions after they have been signed in the partner portal
      • New Module Function: ExecuteAsRoot allows signed scripts to be run with root-level permissions
      • New Provider Profile: "Telekom DeutschlandLAN IP Start"
      • Improved usability: The provider profile "DeutschlandLAN IP Voice/Data S" has been renamed as "Telekom DeutschlandLAN IP Voice Data (S/M/L)"
      • Improved usability: The provider profile "Telekom DeutschlandLAN SIP-Trunk (Pooling)" has been renamed as "Telekom DeutschlandLAN SIP-Trunk"
      • The permission "Instant Messaging" now controls the ability of the user to initiate a chat session
        Developer Comment: This only affects starting a chat session. Users without this permission can still receive and answer chat messages
      • Provider Action Codes containing the characters "#" and "*" can now be assigned to quick dial function keys
      • Improved the consistency of system notifications
      • The replacement text for the conference invitation variable CALL_PARTICIPANT_INFO has been improved
      • A copied provider profile is now used immediately
      • The name of the column "Call number" has been renamed "Call Number/Name
      • The heading for the announcement configuration for voicemail boxes is now labelled "On Timeout / Always Redirections"
      • The handling of telephone numbers containing the DTMF characters * and # has been improved
      • There is now a "back" button on the last step of the backup restore wizard
      • The selection of a CLIP NoScreening prefix has been moved from the line extended settings to the provider configuration (setting "Caller ID Outgoing"). This is to ensure that the correct signaling type is used
        Developer Comment: The signaling number prefix is now set correctly by the STARFACE. This made the drop-down in the line extended settings superfluous and avoids bad configurations. This setting can be changed in the provider profile if needed"
      • The setting "No Screening" has been renamed to "CLIP No Screening"
      • The display settings on Yealink T4x telephones can now be accessed without an administrator password
      • New Firmware for Yealink T4xS devices (81.150.4) that fixes issues with the STARFACE telephone menu
      • Yealink devices with new MAC addresses are now supported
      • New Firmware for Grandstream HT 802 (1.0.3.2)




    [h=3]Bugfixes:[/h]

    • General

      • Fixed a bug that prevented the creation of a backup copy of a provider profile when updated by SIPTRUNK.DE
      • Fixed a bug that caused the UCI event newVoicemailListEntry to not be sent if a group call was redirected to a user voicemail box
      • Fixed a bug that caused the Doorline stream to not be transmitted via the UCI until the call was answered
      • Fixed a bug that caused user redirections to not be removed when the user was deleted
      • Fixed a bug that caused the contents of the TextInput field to be replaced if a file with the same name was uploaded to the module instance
      • Fixed a bug through which a bad input to break the navigation when creating a backup
      • Fixed a bug that caused the "address book" permission to not be applied to the telephone menus
      • Fixed a bug that caused the wrong default value to be applied when configuring a new addressbook block
      • Fixed a bug that caused the phone numbers of interconnection users to not be added to the internal addressbook
      • Fixed a bug that allowed an administrator to configure a group redirection for a user without the permission to configure group redirections
      • Fixed a bug that caused call list entries of anonymous calls to have inconsistent names
      • Fixed a bug that caused call list entries for held and resumed iQueue calls to be listed under "Outgoing"
      • Fixed a bug that caused the sender number in the transmission report to be empty, even when it was set by the sending user
      • Fixed a bug that caused the checkbox "ignore internal calls" in the module "Zeitgesteuerte Umleitung" to not work
      • Fixed a bug that caused a malfunction of the speed-dial function key if the target number was entered with an external dialing prefix
      • Fixed a bug that could prevent the synchronization of group BLF statuses across an interconnection
      • Fixed a bug that caused the "telephone number" dropdown to be disabled when adding a new participant to a planned conference
      • Fixed a bug that caused an empty line to be inserted when moving a user's BLFs in the administration panel
      • Fixed a bug that caused special characters in address book import CSV files to be converted to underscores "_"
      • Fixed a bug affecting the caller id when the signaling type "RFC 3325"
      • Fixed a bug that caused the duration of answered calls to be incorrectly calculated
      • Fixed a bug that caused a call to an iFMC device to not be hung up when the call was answered internally
      • Fixed a bug that made it impossible to transfer a consultation call if the target of the transfer answered the call on their iFMC device
      • Fixed a bug that caused some calls to be unintentionally signaled as "anonymous"
      • Fixed a bug that could cause the name of the answering agent to be listed in the iQueue widget call log
      • Fixed a bug preventing the recreation or editing of a group which had previously been deleted
      • Fixed a bug that prevented outgoing calls via the SIP provider "Toplink"
      • Fixed a but that caused the custom URL feature in the call manager to no longer work
      • Fixed a bug that could stop calls being placed or transferred using BLF function keys
      • Fixed a bug that caused the agent intermission time to be incorrectly calculated if the agent performed a consultation call
      • Fixed a bug that could lead to internal numbers being unassignable after the creation of an internal number block
      • Fixed a bug that caused answered iQueue calls to be listed as missed
      • Fixed a bug that could cause high server load when searching for a telephone account
      • Fixed a bug that caused module numbers to be improperly sorted
      • Fixed a bug that could cause the name of the caller to be incorrectly displayed
      • Fixed a bug that could, in rare cases, cause the caller-id to be incorrectly signaled on international calls
      • Fixed a bug that could, in rare cases, make it impossible to add a new participant to a planned conference
      • Fixed a bug that could, in rare cases, cause a click2dial call to be instantly forwarded to the deposit
      • Fixed a bug that could, in rare cases, lead to the wrong phone number being added to a missed call notification email
      • Fixed a bug that could, in rare cases, make a backup from a very old version of STARFACE to be incompatible to the new version
      • Fixed a bug that could, in rare cases, cause individual call list entries to not be displayed in the UCC Clients
      • Fixed a bug that could, in rare cases, cause a group call which was forwarded via CFU (always) to generate a missed call, even though the call was answered
      • Fixed a bug that could, in rare cases, cause the international dialing code to be set to "0"
      • Fixed a bug that could, in rare cases, cause user update via REST to fail
      • Fixed a bug that could, in rare cases, lead to not all options being available when creating a new Music on Hold theme
      • Fixed a bug that could, in rare cases, cause an interconnection to no longer work due to an internal number block of infinite length
      • Fixed a bug that could, in rare cases, make an internal number block uneditable
      • Miscellaneous minor fixes



    • Telephones

      • Fixed a bug that could, in rare cases, prevent a complete provisioning of Yealink Telephones
      • Fixed a bug, that caused the text displayed when recording announcements on Snom telephones to be confusing
      • Fixed a bug that caused the backlight of Yealink telephones to be continuously activate
      • Fixed a bug that caused a redirection to voicemailbox to be incorrectly set
      • Fixed a bug that caused the Opus codec to be erroneously enabled for Yealink telephones
      • Fixed a bug that caused Doorline feeds to not be displayed on Yealink T48S devices
      • Fixed a bug that prevented the playback of voicemail messages on Yelaink T4xS devices





    Earlier releases...

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!