Features:

  • Highlights
    • Telephone numbers and number blocks can now be moved from one line to another.
    • Fanvil X2 to X6 Series devices are now supported and can be autoprovisioned.
    • The Gigaset N870 Multicell DECT System is now supported and can be autoprovisioned and configured within the STARFACE webinterface.
    • Conferences can now be configured within the UCC Clients.
    • Function Keys can now be configured within the UCC Clients.

  • Please note before installing this update
    • The update to STARFACE 6.6 requires up to 4 GB of free storage.
    • We recommend reducing the size of the call data record with the module "STARFACE Archivierung", and to ensure that fully-qualified phone numbers are used in all module configurations.
    • If you are using STARFACE Connect, please check the line routing settings to ensure that it is using the highest routing priority.
    • The Firefox configuration setting "network.http.sendRefererHeader" must be set to the default value "2". Alternate settings can cause problems when working with the administration panel and the iQueue widget.
    • Before you install you should check if your provider profile has been updated on SIPCHECK.COM.

  • New Features
    • The Gigaset N870 Multicell DECT System is now supported and autoprovisioned, and can be configured within the STARFACE webinterface.
    • Fanvil X2 to X6 Series devices are now supported and can be autoprovisioned.
    • The Java Runtime has been updated to version 8u192.
    • Telephone numbers and number blocks can now be moved from one line to another.
    • The value "dtmfmode" can now be configured in line profiles.
    • The CentOS distribution has been updated to version 6.10.
    • The firmware 10.1.20.0 for Snom D785 has been integrated.
    • Added a new endpoint to the REST API which allows reading and setting of permissions for users.
    • Added a new endpoint to the REST API which allows the creation and management of conferences.
    • Added a new endpoint to the REST API which allows the configuration of voicemail boxes.
    • Added a new endpoint to the REST API which allows the configuration of groups.
    • Added a new property "local" to the "account" REST API entity, which flags the account as a local or federation account.
    • Added a new property "type" to the "account" REST API entity, which contains the type of account (USER, GROUP, REMOTE_USER, REMOTE_GROUP).
    • Added a new property "assignedServiceId" to the "phonenumber" REST API entity, which denotes the service assigned to the telephone number.
    • Changed the log level of the REST API to "INFO".

  • UCC Clients
    • You can find the release notes for the UCC Client for Windows here.
    • You can find the release notes for the UCC Client for Mac here.


Bugfixes:

  • Bugfixes
    • It was possible for a function key id to be displayed in the re-dial menu of Yealink telephones. [Call#1063641]
    • Groups were unavailable when a telephone line (FXS/ISDN) was assigned to more than one agent. [Call#6912735]
    • Under certain circumstances, it was possible for not all callers to be displayed in the iQueue widget. [Call#6910498]
    • It was possible to cause outgoing calls of other users to be ended by dialling *8 for a random call pickup. [Call#6912379]
    • It was possible for the visibility of an interconnection to be one-way only. [Call#6911470]
    • It was possible to import empty address book contacts via CSV.
    • It was not possible to import web server certificates via the Administration Panel. [Call#1077990] [Call#6910559]
    • Some STARFACE Connect phone numbers were not imported correctly.
    • The instant messaging history of a user was not cleared when the user was deleted. [Call#6910513]
    • Variables in conference invitations were always replaced by the English text if the "Default" text was selected.
    • Under certain circumstances it was possible for finished conferences to not be marked as finished.
    • A group created directly after creating a group with an external phone number was also assigned that external telephone number.
    • It was not possible to assign a user to a group in the "logged off" state.
    • Changes to telephone profiles were only applied when saved a second time.
    • The web administration panels of Snom 320 and 360 devices could not be reached. [Call#6905476]
    • Snom 320 devices were only provisioned in English. [Call#6905812] [Call#6905476]
    • Sent faxes were occasionally not displayed in the fax list. [Call#6904302]
    • E-Mails were not sent after completing the initial configuration.
    • It was possible for manual dialplan settings in the line configuration to not contain the line id persisted via the database.
    • The connection to the Openfire component was lost when saving changes to users and groups in rare circumstances. [Call#1059652]
    • Changes to telephones restricted solely to upper/lower case characters were not saved correctly.
    • Some keys were not displayed during an active call on Snom 760 devices.
    • Some French translations were incorrect.
    • The REST endpoint for avatars did not work as intended.
    • It was possible to create unique function keys multiple times via the REST API.
    • Under very rare circumstances, user licenses were incorrectly handled.
    • In extremely rare circumstances it was possible for a call to not be placed to an analogue device. [Call#1057015] [Call#6914545]
    • Function keys were copied to all telephones belonging to a user, instead of just the device selected.
    • The resolution of caller names from the internal address book has been improved significantly.
    • It was possible for the creation of an NGN provider account to fail.
    • DTMF signals were not always registered correctly
    • SIP lines would sometimes not register when the host IP address behind a DNS name changed
    • Calls were incorrectly hung up if they were parked too frequently
    • In rare circumstances, it was possible for an incoming call to be sent to the wrong extension
    • NGN accounts could not be saved for some provider profiles

  • Known Issues Gigaset N870
    • A reboot or manual provisioning request via the N870 web interface is required after a factory reset or role change.
    • The contacts telephone key is currently undefined.
    • The Umlaut "ü" in the "SF-Menü" softkey label is displayed incorrectly for German users.
    • Devices switch to speakerphone when retrieving voicemails.
    • Devices switch to speakerphone when receiving CTI calls.
    • Registering multiple handsets simultaneously will frequently fail.

  • Known Issues Fanvil
    • The Call-List and Contact Search keys are not linked to the STARFACE service.
    • Some line breaks are not displayed correctly.
    • A reboot is required after the device is autoprovisioned.
    • Some resources are incorrectly translated.
    • The "Park and Orbit" function key does not work.
    • Miscellaneous known issues when displaying new voicemail messages
    • The re-dial key is not linked to the Call-List.
    • Some display issues were noted when using a quickdial key to initiate a call.
    • Navigating in the STARFACE-Menu is not fully implemented.
    • The telephone does not register the removal of the device from a user.

  • Known Issues REST API for Conferences
    • The permissions for the creation and alteration of conferences are not respected for some actions.
    • It is not possible to edit a managed conference if an internal participant is using a phone number that isn't their primary internal number.




Earlier releases...