Es wir immer kurioser // Ausgehend funktioniert die Sprache jetzt einwandfrei // Eingehend kommen die Rufe nicht an

  • Wie gesagt, es ist immer die erste IP, die beim Anlegen des Moduls gespeichert worden ist. Dies nie aktualisiert worden.




    Leitung 1



    [2022-10-31 17:59:21,154] [DEBUG] [] [] [IsEntryPointTriggeredbySaveChanges] b716edc0-9b8c-4bd5-a13e-1796fa1539e0


    [2022-10-31 17:59:21,155] [DEBUG] [] [] [Trigger] ##################################


    [2022-10-31 17:59:21,177] [DEBUG] [] [] [LogAnalyzer] Extracted: 0 Lines from Logfile


    [2022-10-31 17:59:21,177] [DEBUG] [] [] [Trigger] []


    [2022-10-31 17:59:21,177] [DEBUG] [] [] [IPExtractor] Applying Regex: (.*)(chan_sip.c: Call from '' )(\()(.*)(:.*)


    [2022-10-31 17:59:21,177] [DEBUG] [] [] [IPExtractor] Total IP's found: 0


    [2022-10-31 17:59:21,177] [DEBUG] [] [] [Trigger] []


    [2022-10-31 17:59:21,177] [DEBUG] [] [] [FilterIPs] Using Subnet:217.0.0.0/16


    [2022-10-31 17:59:21,177] [DEBUG] [] [] [FilterIPs] Total IP's after filter: 0


    [2022-10-31 17:59:21,177] [DEBUG] [] [] [Trigger] []


    [2022-10-31 17:59:21,177] [DEBUG] [] [] [_UpdateSIPConfig] ###### Updating SIP Config #######


    [2022-10-31 17:59:21,177] [DEBUG] [] [] [UpdateSIPConfig] Reading: /etc/asterisk/sip.conf


    [2022-10-31 17:59:21,178] [DEBUG] [] [] [UpdateSIPConfig] Searching for existing IP's...


    [2022-10-31 17:59:21,178] [DEBUG] [] [] [UpdateSIPConfig] host=217.0.28.39


    [2022-10-31 17:59:21,178] [DEBUG] [] [] [UpdateSIPConfig] Skipping: 217.0.28.39


    [2022-10-31 17:59:21,178] [DEBUG] [] [] [UpdateSIPConfig] No new IP's need to be added to /etc/asterisk/sip.conf


    [2022-10-31 17:59:30,034] [DEBUG] [] [] [_UpdateSIPConfig] ###### Updating SIP Config #######


    [2022-10-31 17:59:30,035] [DEBUG] [] [] [UpdateSIPConfig] Reading: /etc/asterisk/sip.conf


    [2022-10-31 17:59:30,036] [DEBUG] [] [] [UpdateSIPConfig] Searching for existing IP's...


    [2022-10-31 17:59:30,036] [DEBUG] [] [] [UpdateSIPConfig] host=217.0.28.39


    [2022-10-31 17:59:30,036] [DEBUG] [] [] [UpdateSIPConfig] Skipping: 217.0.28.39


    [2022-10-31 17:59:30,036] [DEBUG] [] [] [UpdateSIPConfig] No new IP's need to be added to /etc/asterisk/sip.conf




    Leitung 2



    [2022-10-29 19:31:30,462] [ERROR] [] [] [UpdateSIPConfig] Missing Providerconfig for ID:1059


    [2022-10-30 08:46:30,686] [ERROR] [] [] [UpdateSIPConfig] Missing Providerconfig for ID:1059


    [2022-10-30 09:14:30,698] [ERROR] [] [] [UpdateSIPConfig] Missing Providerconfig for ID:1059


    [2022-10-31 14:11:30,152] [ERROR] [] [] [UpdateSIPConfig] Missing Providerconfig for ID:1059


    [2022-10-31 15:45:08,091] [ERROR] [] [] [UpdateSIPConfig] Missing Providerconfig for ID:1059


    [2022-10-31 17:59:12,162] [DEBUG] [] [] [IsEntryPointTriggeredbySaveChanges] 9fca29ec-6824-45ce-bbac-b52e21284fc0


    [2022-10-31 17:59:12,165] [DEBUG] [] [] [Trigger] ##################################


    [2022-10-31 17:59:12,187] [DEBUG] [] [] [LogAnalyzer] Extracted: 0 Lines from Logfile


    [2022-10-31 17:59:12,187] [DEBUG] [] [] [Trigger] []


    [2022-10-31 17:59:12,187] [DEBUG] [] [] [IPExtractor] Applying Regex: (.*)(chan_sip.c: Call from '' )(\()(.*)(:.*)


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [IPExtractor] Total IP's found: 0


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [Trigger] []


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [FilterIPs] Using Subnet:217.0.0.0/16


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [FilterIPs] Total IP's after filter: 0


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [Trigger] []


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [_UpdateSIPConfig] ###### Updating SIP Config #######


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [UpdateSIPConfig] Reading: /etc/asterisk/sip.conf


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [UpdateSIPConfig] Searching for existing IP's...


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [UpdateSIPConfig] host=217.0.28.39


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [UpdateSIPConfig] Skipping: 217.0.28.39


    [2022-10-31 17:59:12,188] [DEBUG] [] [] [UpdateSIPConfig] No new IP's need to be added to /etc/asterisk/sip.conf


    [2022-10-31 17:59:30,031] [DEBUG] [] [] [_UpdateSIPConfig] ###### Updating SIP Config #######


    [2022-10-31 17:59:30,031] [DEBUG] [] [] [UpdateSIPConfig] Reading: /etc/asterisk/sip.conf


    [2022-10-31 17:59:30,031] [DEBUG] [] [] [UpdateSIPConfig] Searching for existing IP's...


    [2022-10-31 17:59:30,031] [DEBUG] [] [] [UpdateSIPConfig] host=217.0.28.39


    [2022-10-31 17:59:30,031] [DEBUG] [] [] [UpdateSIPConfig] Skipping: 217.0.28.39


    [2022-10-31 17:59:30,031] [DEBUG] [] [] [UpdateSIPConfig] No new IP's need to be added to /etc/asterisk/sip.conf


    [2022-10-31 18:00:30,003] [DEBUG] [] [] [_UpdateSIPConfig] ###### Updating SIP Config #######


    [2022-10-31 18:00:30,003] [DEBUG] [] [] [UpdateSIPConfig] Reading: /etc/asterisk/sip.conf


    [2022-10-31 18:00:30,004] [DEBUG] [] [] [UpdateSIPConfig] Searching for existing IP's...


    [2022-10-31 18:00:30,004] [DEBUG] [] [] [UpdateSIPConfig] host=217.0.28.39


    [2022-10-31 18:00:30,004] [DEBUG] [] [] [UpdateSIPConfig] Skipping: 217.0.28.39


    [2022-10-31 18:00:30,004] [DEBUG] [] [] [UpdateSIPConfig] No new IP's need to be added to /etc/asterisk/sip.conf


    [2022-10-31 18:01:30,003] [DEBUG] [] [] [_UpdateSIPConfig] ###### Updating SIP Config #######


    [2022-10-31 18:01:30,004] [DEBUG] [] [] [UpdateSIPConfig] Reading: /etc/asterisk/sip.conf


    [2022-10-31 18:01:30,004] [DEBUG] [] [] [UpdateSIPConfig] Searching for existing IP's...


    [2022-10-31 18:01:30,004] [DEBUG] [] [] [UpdateSIPConfig] host=217.0.28.39


    [2022-10-31 18:01:30,004] [DEBUG] [] [] [UpdateSIPConfig] Skipping: 217.0.28.39


    [2022-10-31 18:01:30,004] [DEBUG] [] [] [UpdateSIPConfig] No new IP's need to be added to /etc/asterisk/sip.conf


    [2022-10-31 18:02:30,003] [DEBUG] [] [] [_UpdateSIPConfig] ###### Updating SIP Config #######


    [2022-10-31 18:02:30,004] [DEBUG] [] [] [UpdateSIPConfig] Reading: /etc/asterisk/sip.conf


    [2022-10-31 18:02:30,004] [DEBUG] [] [] [UpdateSIPConfig] Searching for existing IP's...


    [2022-10-31 18:02:30,004] [DEBUG] [] [] [UpdateSIPConfig] host=217.0.28.39


    [2022-10-31 18:02:30,004] [DEBUG] [] [] [UpdateSIPConfig] Skipping: 217.0.28.39


    [2022-10-31 18:02:30,004] [DEBUG] [] [] [UpdateSIPConfig] No new IP's need to be added to /etc/asterisk/sip.conf


    [2022-10-31 18:03:30,003] [DEBUG] [] [] [_UpdateSIPConfig] ###### Updating SIP Config #######


    [2022-10-31 18:03:30,003] [DEBUG] [] [] [UpdateSIPConfig] Reading: /etc/asterisk/sip.conf


    [2022-10-31 18:03:30,004] [DEBUG] [] [] [UpdateSIPConfig] Searching for existing IP's...


    [2022-10-31 18:03:30,004] [DEBUG] [] [] [UpdateSIPConfig] host=217.0.28.39


    [2022-10-31 18:03:30,004] [DEBUG] [] [] [UpdateSIPConfig] Skipping: 217.0.28.39


    [2022-10-31 18:03:30,004] [DEBUG] [] [] [UpdateSIPConfig] No new IP's need to be added to /etc/asterisk/sip.conf

  • Das Modul macht nichts anderes als zu sagen, dass Eingehende Anrufe von dieser IP für diese Leitung erlaubt sind. Es modifziert keine Ausgehenden Verbindungseinstellungen der Leitung.


    Deaktiviere/Lösche sonst das Modul wieder, und wende dich bitte an den STARFACE Support. Bzw. Editiere und Speichere eine Leitung, das sollte die SIP Configuration resetten.


    MfG


    Fabian

  • Das hab ich auch so verstanden, allerdings ändert sich die IP, wieso wird die dann nicht in die Liste eingetragen?


    Es steht exakt nur eine IP in der Liste, diese, die beim Aktivieren und speichern des Moduls erkannt wurde


    Soweit ich verstanden habe, ist ja genau das die Aufgabe des Moduls die veränderte IP in die Liste der erlaubten IP’s einzutragen.

  • Hallo Scaramu


    Es werden nur IP's in die Liste eingetragen, bei denen Eingehende Anruversuche gegen die STARFACE verzeichnet wurden, welche Fehlgeschlagen sind, und sich innerhalb des Gewhitelisteten Subnets befindet.


    Wenn sich die SRV-Records ändern, aber keine Fehlgeschlagenen eingehenden Anrufe auf der STARFACE vereichnet wurden, springt das Modul nicht an.


    MfG


    Fabian

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!