Provisionierung von Patton 4112 mit Starface Cloud

  • Hallo,
    ich habe eine Starface Cloud-Instanz eingerichtet und diese mit eingen Telefonen erfolgreich provisioniert. Nur der Patton SmartNode 4112 weigert sich beharrlich mit der Anlage zu kommunizieren.
    Den Patton habe ich gemäß https://knowledge.starface.de/…ines+Patton+mit+FXS-Ports konfiguriert, jedoch sehe ich im Autoprov-Log der Starface Cloud-Instanz nichts, auch keine Fehlermeldung.
    Es scheint als würde das Patton-Gateway nicht bis zur Cloud durchkommen, Internet funktioniet jedoch, und es gibt auf der Firewall keine Einschränkung bezüglich ausgehenden Netzwerk-Traffics.


    Im Netzwerk ist eine Fritzbox im Einsatz, so dass ich leider keine DHCP-Optionen setzen kann.


    cli version 3.20
    clock local default-offset +00:00
    timer PROVISIONING now + 3 minutes "provisioning execute PF_PROVISIONING_CONFIG"
    webserver port 80 language en
    sntp-client
    sntp-client server primary 0.patton.pool.ntp.org port 123 version 4
    sntp-client server secondary 1.patton.pool.ntp.org port 123 version 4


    system


    ic voice 0


    profile ppp default


    profile tone-set default


    profile voip default
    codec 1 g711alaw64k rx-length 20 tx-length 20
    codec 2 g711ulaw64k rx-length 20 tx-length 20


    profile pstn default


    profile ringing-cadence default
    play 1 1000
    pause 2 4000


    profile sip default
    no autonomous-transitioning


    profile aaa default
    method 1 local
    method 2 none


    profile provisioning PF_PROVISIONING_CONFIG
    destination configuration
    location 1 http://redirect.patton.com/$(system.mac);mac=$(system.mac);serial=$(system.serial);hwMajor=$(system.hw.major);hwMinor=$(system.hw.minor);swMajor=$(system.sw.major);swMinor=$(system.sw.minor);swDate=$(system.sw.date);productName=$(system.product.name);cliMajor=$(cli.major);cliMinor=$(cli.minor);osName=$(cli.major>=4|Trinity|SmartWare);subDirTrinity=$(cli.major>=4|/Trinity);subDirSmartWare=$(cli.major<4|/SmartWare);dhcp66=$(dhcp.66);dhcp67=$(dhcp.67)
    location 2 $(dhcp.66)
    location 3 $(dhcp.66)/$(system.mac).cfg
    location 4 http://$(dhcp.66)/$(dhcp.67)
    location 5 http://$(dhcp.66)/$(system.mac).cfg
    location 6 tftp://$(dhcp.66)/$(dhcp.67)
    location 7 tftp://$(dhcp.66)/$(system.mac).cfg
    activation reload immediate


    profile provisioning starface-firmware
    destination script
    location 1 http://kunde.starface-cloud.com:50080/ap/fw/patton/4110/bw
    activation reload graceful


    profile provisioning starface-config
    destination configuration
    location 1 http://kunde.starface-cloud.com:50080/ap/patton/SN4112/$(system.mac).cfg
    activation reload graceful


    context ip router


    interface eth0
    ipaddress dhcp
    tcp adjust-mss rx mtu
    tcp adjust-mss tx mtu


    port ethernet 0 0
    medium auto
    encapsulation ip
    bind interface eth0 router
    no shutdown


    port fxs 0 0
    shutdown


    port fxs 0 1
    shutdown



    Im Log des Patton-Gateways wird angezeigt:
    2018-10-29T15:05:46 : LOGINFO : Time: set clock from 1970-01-01T00:05:04 to 2018-10-29T15:05:46
    2018-10-29T15:06:49 : LOGERROR : Provisioning 'starface-firmware' failed: NUMBER OF FAILED LOCATIONS:1. NO LOCATION COULD BE CONTACTED SUCCESSFULLY
    2018-10-29T15:06:51 : LOGERROR : Provisioning 'starface-config' failed: NUMBER OF FAILED LOCATIONS:1. NO LOCATION COULD BE CONTACTED SUCCESSFULLY
    2018-10-29T15:08:18 : LOGERROR : Provisioning 'PF_PROVISIONING_CONFIG' failed: NUMBER OF FAILED LOCATIONS:7. NO LOCATION COULD BE CONTACTED SUCCESSFULLY
    2018-10-29T15:08:58 : LOGINFO : Auto Configuration (DHCP):
    Interface eth0 shut down
    Removed default route
    Removed name servers


    Kann mir jemand einen Hinwies geben wo der Fehler liegen könnte ?


    Grüße


    Tobias

    Edited once, last by tetranet ().

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!